Lan-Wan Bridge Settings - AudioCodes MP-20 Series User Manual

12.5

LAN-WAN Bridge Settings

A WAN-LAN bridge is a bridge over WAN and LAN devices. In such a setup, computers on
the device LAN side can get IP addresses that are known on the WAN side.

To configure an existing bridge or create a new one:
1. From the menu bar, click the Network Connections menu, and in the screen
'Network Connections' click the New
appears.
2. Select the 'Advanced Connection' option, and then click Next; the 'Advanced
Connection' screen appears.
3. Select the 'Network Bridging' option, and then click Next; the screen 'Bridge Options'
opens.
4. Select whether to configure an existing bridge (this option only appears if a bridge
exists) or to add a new one:
•
Configure Existing Bridge: Select this option and then click Next; the screen
'Network Bridging' opens, allowing you to add new connections or remove
existing ones, by selecting or clearing their respective check boxes.
For example, checking the WAN check box creates a LAN-WAN bridge.
User's Manual
Figure 12-52: Bridge Options
Figure 12-53: Network Bridging Screen
170
MP-20x Multimedia Home Gateway
icon; the 'Connection Wizard' screen
Document #: LTRT-50614