Documentation Feedback - AudioCodes MP-20 Series User Manual

General Notes, Warnings, and Safety Information
Note: Open source software may have been added and/or amended for this product. For
further information please visit our website at:
your AudioCodes sales representative.
Warning:
•
Use only the AC/DC power adapter supplied with MP-20x. Do not use any other
power adapter. This power adapter is a 12 VDC +/-10%, tolerance, 2A, limited power
source wall-mount Class II power supply adapter.
•
Ensure that the VAC ratings match.
•
Ensure that you have read the Regulatory Information, obtained from
www.audiocodes.com/library.
Warning:
connected equipment. 3-wire-connected equipment might not respond to incoming
ringing when attached to these ports.
For Customers in Canada:
This Class [B] digital apparatus complies with Canadian ICES-003.
Cet appareil numérique de la classe [B] est conforme à la norme NMB-003 du Canada.
The County Code Selection feature is disabled for products marketed in the US/Canada.
Document Revision Record
LTRT
50610 Initial document release.
50611 Provisioning using DHCP Options 66 & 67 and TFTP Server sections were added.
50612 MP-204B features were added.
50613 The Remote Configuration and Management Interfaces section was updated.
50614 The PacketSmart Configuration section was updated.

Documentation Feedback

AudioCodes continually strives to produce high quality documentation. If you have any
comments (suggestions or errors) regarding this document, please fill out the
Documentation Feedback form on our Web site at
User's Manual
Before connecting MP-20x to power:
The Phone 1 and Phone 2 ports are not specifically designed for 3-wire-
MP-20x Multimedia Home Gateway
http://audiocodes.com/support
Description
http://www.audiocodes.com/downloads.
16
or contact
Document #: LTRT-50614