Table 14-12: Internetgatewaydevice.services.voiceservice.i.voiceprofile.i.sip - AudioCodes MP-20 Series User Manual

TR-069/TR-104
Parameter
NumberOfLines

Table 14-12: InternetGatewayDevice.Services.VoiceService.i.VoiceProfile.i.SIP

TR-069/TR-104
Parameter
OutboundProxy
OutboundProxyPort
ProxyServer
ProxyServerPort
ProxyServer
Transport
RegisterExpires
RegistrarServer
Transport
UserAgentPort
UserAgentTransport
User's Manual
Configuration File
Parameter
voip/num_of_fxs_lines
Configuration File
Parameter
voip/
signalling/sip/sip_outbou
nd_proxy/addr
voip/
signalling/sip/sip_outbou
nd_proxy/proxy
voip/signalling/sip/proxy_
address
or
voip/signalling/sip/sip_re
gistrar/addr
voip/signalling/sip/proxy_
port
or
voip/signalling/sip/sip_re
gistrar/port
voip/signalling/sip/transp
ort_protocol
voip/signalling/sip/proxy_
timeout
voip/signalling/sip/transp
ort_protocol
voip/signalling/sip/port
voip/signalling/sip/transp
ort_protocol
222
MP-20x Multimedia Home Gateway
Description
Number of instances of Line within this
VoiceProfile.
Description
Host name or IP address of the outbound
proxy. If a non-empty value is specified, the
SIP endpoint must send all SIP traffic
(requests and responses) to the host
indicated by this parameter and the port
indicated by the OutboundProxyPort
parameter. This must be done regardless of
the routes discovered using normal SIP
operations, including use of Route headers
initialized from Service-Route and Record-
Route headers previously received. The
OutboundProxy value is not used to
generate the URI placed into the Route
header of any requests.
Destination port for connecting to the
outbound proxy. This parameter must be
ignored unless the value of the
OutboundProxy parameter in this object is
non-empty.
Host name or IP address of the SIP proxy
server.
Destination port for connecting to the SIP
server.
Transport protocol for connecting to the SIP
server. Must be chosen from among the
transports supported.
Register request Expires header value (in
seconds).
Transport protocol for connecting to the SIP
server. Must be chosen from among the
transports supported.
Port for incoming call control signaling.
Transport protocol for incoming call control
signaling.
Document #: LTRT-50614