User's Manual
8.1.1.5
L2TP
The procedure below describes how to connect to the Internet by L2TP.
To configure L2TP connection:
1.
Under the WAN Ethernet group, from the 'Connection Type' drop-down list, select
'Layer 2 Tunneling Protocol (L2TP)'.
2.
Configure the following (provided by your ITSP):
•
L2TP Server Host Name or IP Address
•
Login user name
•
Login password
3.
From the 'Internet Protocol' drop-down lists, select the method for assigning an IP
address (provided by your ITSP).
Version 4.4.3
Figure 8-6: L2TP WAN Ethernet Connection
69
8. Setting up your Device
MP-20x Multimedia Home Gateway