Agilent Technologies 1100 Series Reference Manual page 131

When working with solvents please observe appropriate safety procedures (for
WARNING
example, goggles, safety gloves and protective clothing) as described in the material
handling and safety data sheet supplied by the solvent vendor, especially when toxic or hazardous
solvents are used.
Always operate the detector with the top covers in place.
NOTE
CAUTION
There will be a risk of damaging hardware due to overheating when operating the
instrument without covers.
Electronic boards and components are sensitive to electronic discharge (ESD). In
CAUTION
order to prevent damage always use an ESD protection (for example, the ESD wrist
strap from the accessory kit) when handling electronic boards and components, see
Strap Electronic boards are sensitive to electronic discharge (ESD). In order to prevent damage, always
use a ESD strap supplied i the sta dard a essor kit see A essor Kit o page
ha dli g ele tro i
Eye damage may result from directly viewing the light produced by the xenon flash
WARNING
lamp used in this product.
1100 Series FD Reference Manual 131
oards a d o po e ts.
Repairing the Fluorescence Detector
on page 133.
5
Usi g the ESD
6 he