Use VLAN For Management Interfaces: This control can be configured with one of the
following three values:
•
No VLAN Tagging
•
IEEE 802.1Q Tagged (C-Tag, Type 8100)
•
IEEE 802.1ad Tagged (S-Tag or B-Tag, Type 88a8)
VLAN Management VID: This 802.1Q or 802.1ad VLAN ID (VID) will be included in packets
generated by the management interfaces. Valid settings are in the range 0 to 4094.
VLAN Management Priority: This 802.1Q or 802.1ad VLAN Priority will be included in
packets generated by the management interfaces. Valid settings are in the range 0 to 7.
VLAN Management VID Validation: If enabled, the management interfaces will only respond
to Ethernet packets tagged with the configured Management VID; otherwise packets with any
VID will be accepted.
8.3.1.4
QoS Configuration Page
The QoS configuration page (Figure 35) allows the system administrator to configure the
classification of priority encoded Ethernet frames into up to eight traffic classes.
Priority Queue Mapping: specifies the VLAN priority flag to packet queue mapping. The
higher the queue number the greater its priority.
Figure 35 - QoS Configuration Page
92
8 Web Page Reference