Table of Contents
Advertisement
13.3 Software/Features
The connectorized variant operates in the same way as the basic 500 Series and is released
initially with the feature set to the Connectorized PTP 500 Series variant. The areas where
the functionality is modified are:
13.3.1 Status Page
The link loss calculation presented on the Status Page of the management interface has to be
modified to allow for the increased antenna gains at each end of the link. The manufacturing
process of the Connectorized 500 Series Bridge configures the standard hardware of the unit
for use with external antennas. The installer is prompted, as part of the installation process, to
enter the gain of the external antenna(s) and cable losses at each end of the link.
Peer-to-peer messaging is used to pass the effective antenna gain to each end of the link so
that the link loss calculations can be correctly computed.
Figure 100 - Connectorized 500 Series bridge Status Page
13 PTP 500 Series Bridge – Connectorized Model
168
Advertisement
Table of Contents
