Reset Ip & Ethernet Configuration; Figure 83 - Confirm Reset To Factory Default Pop Up; Figure 84 - Ip And Ethernet Erased Successfully Page - Motorola PTP 58500 User Manual

9 Recovery Mode
9.2 Reset IP & Ethernet Configuration
To reset IP & Ethernet configuration back to factory defaults the user should press the "Reset
IP & Ethernet Configuration back to factory defaults" button on the "Recovery Options" page
(Figure 79). The user will now be presented with a pop up box asking them to confirm the
action (Figure 83).

Figure 83 - Confirm Reset to Factory Default Pop Up

On confirmation the following page will be displayed (Figure 84). The user should now reboot
the unit by pressing the "Reboot" button.

Figure 84 - IP and Ethernet Erased Successfully page

146