Figure 15 - Integral Safety Loop - Motorola PTP 58500 User Manual

7 Installation
The enclosure and mounting brackets of the PTP 500 Series Bridge product range are
capable of withstanding wind speeds up to 200 mph (320 kph). The installer should ensure
that the structure the bridge is fixed to is also capable of withstanding the prevalent wind
speeds and loads. See Section 12 "Wind Loading".
WARNING: The integral safety loop should be used both for hoisting the ODU up a mast or
building and into position, and also as a fixing point to secure a permanent safety lanyard
from the tower/building to the ODU in case of mounting failure.

Figure 15 - Integral Safety Loop

The length of the safety lanyard must not exceed 1m (approx 3 ft) in length. The lanyard
should be made from a material that does not degrade in an outdoor environment.
The safety lanyard must be fixed to a separate fixing point that is not part of the direct
mounting system for the ODU.
59