Figure 123 - Aes Software License Key Data Entry - Motorola PTP 58500 User Manual

Figure 123 – AES Software License Key Data Entry
Configuring link encryption will necessitate a 500 Series bridge service outage. Therefore it is
recommended that the configuration process be scheduled during an appropriate period of
low link utilization. Motorola recommends the following process for entering new license keys
and minimizing service outage:
1. Open two browsers, one for each end of the link
2. Navigate to the 'License Key' data entry page for each end of the link
3. Enter the license keys and click the 'Validate license key' button at each end of the
link. This will allow the software to validate the license key prior to the system reset.
(DO NOT CLICK ARE YOU SURE POPUP DIALOG)
4. When both license keys have been successfully validated confirm the reboot for both
ends of the link. The software is designed to allow five seconds so that a user can
command both ends of the link to reset before the wireless link drops.
5. The link will automatically re-establish.
15 AES Encryption Upgrade
195