National And Regional Regulatory Notices - Ptp 54500 Variant; Fcc And Industry Canada (Ic) Notification - Motorola PTP 58500 User Manual

Ptp 500 series point-to-point wireless bridges
Hide thumbs Also See for PTP 58500:
Table of Contents

Advertisement

16.3 National and Regional Regulatory Notices – PTP 54500 Variant

16.3.1 FCC and Industry Canada (IC) Notification

This device complies with FCC Part 15 for the USA and RSS-210 Issue 7 of Industry Canada.
Operation is subject to the following two conditions: (1) This device may not cause harmful
interference, and (2) This device must accept any interference received, including
interference that may cause undesired operation. Users should be cautioned to take note that
high power radars are allocated as primary users (meaning they have priority) of 5250 – 5350
MHz and 5470 – 5725 MHz and these radars could cause interference and/or damage to
license-exempt local area networks (LELAN).
For the connectorized version of the product and in order to reduce potential radio
interference to other users, the antenna type and its gain should be so chosen that the
equivalent isotropically radiated power (EIRP) is not more than that permitted by the
regulations. The transmitted power must be reduced to achieve this requirement.
This equipment has been tested and found to comply with the limits for a Class B digital
device, pursuant to Part 15 of the US FCC Rules and with RSS-210 of Industry Canada.
These limits are designed to provide reasonable protection against harmful interference in a
residential installation. This equipment generates, uses, and can radiate radio-frequency
energy and, if not installed and used in accordance with these instructions, may cause
harmful interference to radio communications. If this equipment does cause harmful
interference to radio or television reception, which can be determined by turning the
equipment on and off, the user is encouraged to correct the interference by one or more of
the following measures:
Increase the separation between the affected equipment and the unit;
Connect the affected equipment to a power outlet on a different circuit from that which the
receiver is connected to;
Consult the dealer and/or experienced radio/TV technician for help.
FCC and Industry Canada Certification Numbers are listed below:
16 Legal and Regulatory Notices
201

Advertisement

Table of Contents
loading

This manual is also suitable for:

Ptp 54500

Table of Contents