Table of Contents
Advertisement
13.7.4 Miscellaneous supplies
The following miscellaneous supplies will be required:
•
Cable ties, cable cleats – for securing cables
•
Self-amalgamating tape – to weatherproof the RF connectors
•
PVC tape – for additional protection of the RF connectors and securing cables
13.7.5 Mounting the Connectorized 500 Series Bridge
A Connectorized 500 Series bridge is shipped with the same bracket as supplied with an
Integrated unit. Details on the use of this bracket can be found in Section 3.3.7 "Mounting
Brackets". The PTP 500 Series Bridge should be mounted in a position that gives it maximum
protection from the elements, but still allows easy access for making off the various
connections and applying the recommended weatherproofing.
When using dual polar antennas the Connectorized 500 Series bridge should be mounted in
such a position as to minimize the cable length, keeping losses to a minimum, taking into
account the minimum cable lengths required by the FCC regulations, see Section 13.6.3
"Antennas for USA / Canada – 5.8 GHz".
When using separate antennas the Connectorized 500 Series Bridge should be mounted in
such a position as to minimize both cable runs between the unit and the antennas. It is not
necessary to mount the Connectorized 500 Series Bridge at the mid point between the
antennas.
13.7.6 Mounting the antennas
The Antennas should be mounted according to the manufacturer's instructions. Actual
antenna position will depend on the available mounting positions and link requirements. It
may be necessary to mount the antennas 20m apart or at a certain distance from the ground
to get the desired results.
13.7.7 Alignment Process
When aligning antennas deployed with a Connectorized 500 Series bridge unit it may not be
possible to hear the alignment tone emanating from the unit. In this case it may be necessary
for a second installer to assist in the operation. Alternatively, it may be possible to extend the
tube on the supplied stethoscope to give a longer reach.
13 PTP 500 Series Bridge – Connectorized Model
181
Advertisement
Table of Contents
