7.3
Tools Required
The following specific tools are required to install a PTP 500 Series Bridge in addition to
general tools:
•
13mm and 22mm Spanner / Wrench
•
RJ45 Crimp Tool. Must be the tool specified for the RJ45 plugs being used.
•
IBM Compatible Personal Computer (PC) running Windows 98 or later with 10, 100 or
1000BaseT Ethernet (Ability to change IP settings easily is recommended)
•
Either Internet Explorer version 6 or higher, or FireFox 1.5 or higher are recommended.
•
Ethernet patch cable
7.4
Installation Support
Online installation support and contact details for your regional support can be found at
http://www.motorola.com/ptp
A Frequently Asked Questions (FAQ) section can be found in Section 18 "FAQs".
7.5
Legal Disclaimer
IN NO EVENT SHALL MOTOROLA, INC. BE LIABLE FOR ANY INJURY TO ANY PERSONS
OR ANY DAMAGE CAUSED DURING THE INSTALLATION OF THE MOTOROLA PTP 500
SERIES PRODUCT.
57
7 Installation