Note: These plots are for 15MHz operation; 5/10MHz operation is similar - the width of the
vertical green bar represents the channel width
The only controls available to the master are the Statistics Window and Interference
Threshold attributes. They will have no effect on the operation of the wireless link and will
only effect the generation of the channel spectrum graphics.
The active channel history menu is removed in this mode of operation as channel hopping is
prohibited.
Figure 63 - Spectrum Management Help Page (Fixed Frequency)
8.3.9
Spectrum Management Control - With Operational Restrictions
When operating with Radar Avoidance enabled the following variances in operation apply:
•
The words "Radar Avoidance" are appended to the "Spectrum Management" title at the
top of the screen. See Figure 64 and Figure 65.
128
8 Web Page Reference