Table of Contents
Advertisement
For the more technically aware, the installation metric is simply the instantaneous receive
power in dBm + 100.
The PDA installation tool is accessed via a hidden URL http://<ip-address>/pda.cgi. It should
be noted that this link is only available after the user has logged in as system administrator.
The large screen version of the graphical user interface is available as a submenu option of
the installation wizard.
8.3.6
Software Upgrade
The 500 Series system has two software image banks; one is a fixed image which is stored in
protected non-volatile memory and cannot be modified by the user. The second bank is used
by the system administrator to upgrade the firmware when necessary. Figure 53 shows the
main software upgrade web page.
The 'Fixed' or 'Recovery' image is used by the System Administrator to:
•
Reset Ethernet configuration to default settings
•
Erase Configuration
•
Upgrade software
For a full description of the Recovery image see Section 9 "Recovery Mode".
Figure 53 - Software Upgrade
116
8 Web Page Reference
Advertisement
Table of Contents
