Table of Contents
Advertisement
1. Slide the right end of the bezel against the right hinge of the recorder.
2. Push the left end of the bezel against the recorder until it clicks into place.
3. Use the provided key to lock the bezel.
Configuring Windows 10
When you start the Video Appliance for the first time, you will need to configure the Windows operating
system that is installed on the appliance.
After the recorder starts, you will need to configure the Windows operating system for the first time.
1. On the first screen, the MICROSOFT SOFTWARE LICENSE TERMS and AVIGILON CONTROL
CENTER™ SOFTWARE END USER LICENSE AGREEMENT are displayed. Review the terms and click
Accept.
2. Select Join a local Active Directory domain.
Note: This prompt appears only if an Active Directory is present on the network. See the
Windows Help and Support files for more information.
3. Enter a user name for accessing the Windows software.
4. Enter a password and password hint for the user name and click Next.
Proceed to activate the license for the Avigilon Control Center software on your Network Video Recorder.
Troubleshooting
Network Configuration
By default, the ACC ES 8 Port Appliance acquires an IP address on the network through DHCP. If you need
to set up the ACC ES 8 Port Appliance to use a static IP address or any specific network configuration, see
the Windows Help and Support files for more information.
By default, the Network Video Recorder acquires an IP address on the network through DHCP. If you need
to set up the recorder to use a static IP address or any specific network configuration, see the Windows
Help and Support files for more information.
Operating System Recovery By Avigilon Recovery Partition
If you need to recover the Windows operating system, the includes an onboard Avigilon recovery partition
that is separate from the operating system partition. The advantage of using the Avigilon recovery partition
is that you do not need an internet connection.
Configuring Windows 10
4
Advertisement
Table of Contents
