The Outdoor Unit (Odu); Figure 2 - Ptp 500 Series Bridge Outdoor Unit (Odu) With Ptp-Lpu - Motorola PTP 58500 User Manual

Each end of the link consists of:
•
An integrated (or connectorized - see section 13) outdoor transceiver unit containing all
the radio and networking electronics hereafter referred to as the Outdoor Unit (ODU).
•
An indoor connection box containing a mains power supply, status indicators and network
connection port. Hereafter referred to as the Power Indoor Unit Plus (PIDU Plus).
A pair of units is normally supplied pre-configured as a link.
The network connection to a PTP 500 Series Bridge is made via a 100BaseT Ethernet
connection. Power is provided to the ODU over the 100BaseT Ethernet connection using a
patented non-standard powering technique.
Power is fed into the PTP 500 Series Bridge PIDU Plus from the mains via a standard "figure
of eight" mains plug. Connection between the ODU and PIDU Plus is made using standard
CAT5e outdoor UV resistant cable. Connection between the PIDU Plus and the Network
Equipment is made using standard CAT5e cable.
3.3.1

The Outdoor Unit (ODU)

The ODU is a self-contained unit. It houses both radio and networking electronics. The ODU
for the PTP 500 Series Bridge should only be deployed using the supplied PTP 300/500/600
Series Bridge PIDU Plus. Figure 2 shows an installation example of a PTP 500 Series ODU.
Figure 2 – PTP 500 Series Bridge Outdoor Unit (ODU) with PTP-LPU
28
3 Getting Started