Table of Contents
Advertisement
Chapter 3: Device Configuration
Minimize MeshManager temporarily as you will return to it shortly. There are still tasks that must be
11
performed in MeshManager to complete the Adding and Changing of a New Device from an 802.11 b/g
Mesh into a 802.11 a Mesh network.
Open the License Key text file that was provided with your MOTOMESH DUO 2.0 Product CDs. The file
12
should be located on its own CD. Check with your sales representative for the exact file name.
The file contents will look similar to the graphic below. If there are several devices to add to a (5.x) 802.11
a Mesh network, then several license keys may be listed in one License Key file. Note that each License
Key is unique to a MAC Address.
Figure 3-7
Copy ONLY the License Key from the text file to the clipboard. Verify that you copying the correct
13
License key by comparing the MAC Address listed after the first comma delimiter to the MAC Address of
your device(s).
IMPORTANT NOTE: DO NOT copy any extra characters or spaces from the front or back of the License
key data. Any extra spaces in the License key can render the key unrecognizable by a device.
Figure 3-8
Maximize the MeshManager Element System application.
14
July 2007
An Example of a License Key Text File
Copying the License Key from the Text File
3-6
License Key
Advertisement
Table of Contents
