4. When both license keys have been successfully validated confirm the reboot for both ends of
the link. The software is designed to allow five seconds so that a user can command both ends
of the link to reset before the wireless link drops.
5. The link will automatically re-establish.
15.1.2 Encryption Mode and Key
Entering the license keys only does not initialize AES link encryption. Link encryption can only
be enabled via the Configuration or Installation Wizard pages. Motorola recommends that the
Configuration page
AES Encryption Upgrade
Figure 126 AES Software License Key Data Entry
Figure 127
be used to configure AES link encryption.
173