Avaya 1230 Administration page 83

files with the file manager interface (this applies to WAV files on the IP Deskphone). The values
are YES and NO. The default value is YES.
- YES — allows the user to delete or copy WAV files on the IP Deskphone through the file
manager
- NO — does not allow the user to delete of copy WAV files on the IP Deskphone through the
file manager
• FM_IMAGES_ENABLE [Y | N] — allows the user to act on JPG and PNG files using the file
manager. The values are Y and N. The default value is Y.
• FM_CERTS_ENABLE [Y | N] — allows the user to act on CER and PEM files using the file
manager. The values are Y and N. The default value is N.
• FM_CONFIG_ENABLE [Y | N] — allows the user to act on CFG files using the file manager.
The values are Y and N. The default value is N.
• FM_LOGS_ENABLE [Y | N] — allows the user to act on CFG files using the file manager. The
values are Y and N. The default value is Y.
• HOTLINE_ENABLE [Y | N] — indicates if Hotline Service is enabled or disabled. The values
are Yes and No. The default value is No.
• HOTLINE_URL — used as the To field of INVITE message by the SIP IP Deskphone to notify
the Proxy Server that this is a call from a Hotline Deskphone. The HOTLINE_URL is not a real
URL of the Hotline target. The IP Deskphone has no idea about the Hotline target. The Proxy
server replaces the To field of INVITE request message with a real Hotline target when it
receives an INVITE request from the Hotline Phone. The default value is Hotline.
• SESSION_TIMER_ENABLE [YES | NO] indicates if the session timer service is enabled or
disabled. The values are Yes and No. The default value is Yes.
- YES — the Session Timer Service for the IP Deskphone is enabled, and the behavior of the
IP Deskphone complies with RFC4028.
- NO — the Session Timer Service is disabled.
• SESSION_TIMER_DEFAULT_SE — indicates the default session expiration in seconds. The
Session-Expires header, in a request, informs the terminating endpoint and proxies of the
Session-Expires interval value that the originating endpoint requires for the session timer
duration, in units of delta seconds. The default value is 1800.
• SESSION_TIMER_MIN_SE — indicates the minimum session expiration in seconds. The
default value is 1800.
• SET_REQ_REFRESHER [0 | 1| 2] — indicates what refresher value is configured in the initial
session request. The values are 0, 1, and 2. The default value is 0.
- 0 — indicates that the refresher is omitted
- 1 — indicates that the refresher is configured to UAC
- 2 — indicates that the refresher is configured to UAS
March 2015 SIP Software for Avaya 1200 Series IP Deskphones-Administration
Comments? infodev@avaya.com
Create the device configuration file
83