Chapter 29: Maintenance - Avaya 1230 Administration

Chapter 29: Maintenance

Convert SIP Software to UNIStim Software
The IP Deskphone can be ordered with UNIStim software installed or with SIP Software installed. If
you have an IP Deskphone with UNIStim software, and you convert the software from UNIStim to
SIP, the UNIStim software is overwritten. To convert an IP Deskphone from SIP Software to
UNIStim software, a software reload is required.
Reloading UNIStim software
1. Determine the appropriate UNIStim version to match the hardware release number of your
IP Deskphone.
There are different versions of UNIStim software available for download. Which version you
choose depends on the hardware release number of your particular IP Deskphone.
If the hardware release number of your IP Deskphone is among the following hardware
release numbers, download UNIStim software version release 062AC5L or higher (the
hardware release number is the Product Engineering Code [PEC] followed by the release
number):
• NTYS05ACE6 20
• NTYS05BCE6 20
• NTYS05BCGSE6 04
If the hardware release number of your IP Deskphone is not among the previous list,
download UNIStim version release 062AC5L or higher.
2. Download the appropriate UNIStim software file to your TFTP server.
3. Create an 12xxSIP.cfg file containing the following information:
[FW]
DOWNLOAD_MODE FORCED
VERSION xxx
FILENAME yyy.bin
where xxx is the UNIStim version number appropriate for the hardware release of your
IP Deskphone, for example, 062AC5L , and yyy.bin is the filename containing the version
number, for example, SIP12x004.01.03.00.bin.
4. Power the IP Deskphone off and on. The IP Deskphone reboots and contacts the TFTP
server upon bootup and downloads the new UNIStim software.
SIP Software for Avaya 1200 Series IP Deskphones-Administration
328
Comments? infodev@avaya.com
March 2015