Avaya 1230 Administration page 121

Press * to enter a "." (period) for the dotted decimal format.
• NETMSK: = <IP Deskphone network mask>
• DEF GW := < IP Deskphone default gateway>, and then press the OK soft key.
9. Use the down arrow in the Navigation keys to scroll down and select 12. Provisioning
Server.
12 Provisioning Server
Man
10. Press the Man soft key to indicate a manual entry for the TFTP provisioning server, then
press the Cfg soft key.
11. Press the OK soft key until Prov:0.0.0.0 is displayed.
12. Enter the IP address of the TFTP provisioning server where the 12xxBoot.cfg file is located.
13. Press the OK soft key until the following menu is displayed.
Apply
14. Press the Apply soft key.
The IP Deskphone reboots and searches for the 12xxBoot.cfg file at the IP address of the
TFTP provisioning server that you entered manually.
After reading the 12xxBoot.cfg file information, the IP Deskphone downloads and installs the
specified SIP software using the specified protocol and provisioning server IP address. This can be
the same provisioning server as the one where the 12xxBoot.cfg file is located.
Once the software image is installed, the IP Deskphone reboots again and looks for the standard
SIP configuration files listed in the following table. The IP Deskphone then follows the 12xxSIP.cfg
file instructions.
Model
1220 IP Deskphone
1230 IP Deskphone
Related Links
Downloading the 12xxBoot.cfg file
March 2015
Cfg
The End of Menu
Auto
Config file name
1220SIP.cfg
1230SIP.cfg
on page 118
SIP Software for Avaya 1200 Series IP Deskphones-Administration
Comments? infodev@avaya.com
Downloading the 12xxBoot.cfg file
AllMan Cancel
Cancel
121