Avaya 1230 Administration page 407

Important:
Once the DHCP configuration is put in place, there is no way to prevent random phones
migrating to the Avaya Aura environment at an unexpected time due to rebooting caused
by a power outage or other reason.
6. Force a reboot of the IP Deskphones by running the isetResetAll command in the
Signaling Server shell.
Result
1. The IP Deskphone reboots.
2. During bootup, the IP Deskphone sends a DHCP request with Vendor Class ID "Nortel-
i2004-A" or "Nortel-i2004-B". The DHCP server sends back a DHCP response with the IP
Deskphone's IP address and the URL of the IP Office server (in DHCP option 66).
3. The IP Deskphone downloads the SIP software from the IP Office server and upgrades.
When the upgrade is completed, the IP Deskphone automatically reboots again.
Warning:
A power outage at this stage may cause firmware corruption. If this happens, the IP
Deskphone may not be able to boot up, and it may be necessary to return the IP
Deskphone for repair.
4. The IP Deskphone starts and downloads the device configuration file, images, licenses,
languages, and so on, from the Avaya Aura Utility server.
5. When configuration is complete, the IP Deskphone automatically reboots.
6. The IP Deskphone is ready to use.
Note:
If auto login is not configured in the configuration files, the IP Deskphone displays the login
screen. The IP Deskphone user must enter a valid login and password in order to register on IP
Office.
Related Links
Migrating IP Deskphones with UNIStim firmware from CS 1000 to IP Office
March 2015
Migrating IP Deskphones with UNIStim firmware from CS 1000 to IP Office
SIP Software for Avaya 1200 Series IP Deskphones-Administration
Comments? infodev@avaya.com
on page 401
407