Qos And Tos Commands - Avaya 1230 Administration

Creating the provisioning files
• RPID_PRESENCE_ENABLE [YES | NO] — This parameter configures RPID-based presence
with Avaya Presence Services. RPID is required for Avaya Presence Services. The defailt is
NO.
- YES — if Avaya Presence Services with Avaya Aura Session Manager/Communication
Manager are used .
- NO — if Avaya Presence Services with Avaya Aura Session Manager/Communication
Manager are not used (default).
• PRES_SERVER_IP <IP address of Presence Server> — This parameter is the IP address of
Avaya Presence Server. It is required if Avaya Presence Services are used.
Default value is <empty>.
• USE_DEFAULT_DEV_CERT [YES | NO] — This parameter controls the use of the default
device certificate for HTTPS/TLS connections to Avaya Aura
be configured through the device configuration file.
- YES – Use the default device certificate if no customer device certificate is installed.
- NO – Do not use the default device certificate.
• AVAYA_AURA_MODE_ENABLE [YES | NO] — This parameter is a command that specifies if
®
Avaya Aura -specific features are active on the IP Deskphone or not. It can be configured
through the device configuration file and through server profiles. The default value is NO.
- YES – Avaya Aura
- NO – Avaya Aura
• CALL_ORIGIN_BUSY [YES | NO] — This parameter determines if the user is presented with
an incoming call when entering the address of an outbound call. The default is NO.
• LINE_KEY_SCROLLING [YES | NO] — This parameter defines whether scrolling for long line
key labels is enabled. The default value is NO.
- YES – scroll long line key labels
- NO – do not scroll long line key labels
• USE_CONTACT_IN_REFERTO [YES | NO] — This parameter defines which transfer target
address should be used in Refer-To header of REFER SIP request on attended transfer. The
default value is YES.
- YES – use Contact URI of the transfer target in Refer-To header of REFER SIP request
- NO – use To URI of the transfer target in Refer-To header of REFER SIP request

QoS and ToS commands

• AVAYA_AUTOMATIC_QoS [YES | NO] — provides a better treatment for signaling and media
packets after you deploy the IP Deskphones with the Avaya switches. All the devices use
SIP Software for Avaya 1200 Series IP Deskphones-Administration
88
®
-specific features are active.
®
-specific features are not active.
Comments? infodev@avaya.com
®
. The default value is NO. It can
March 2015