Avaya 1230 Administration page 163

Use the right arrow in the Navigation key cluster to highlight the Ntwk Port Duplex box. Press
the Select key to access a list of Ntwk Port Duplex choices:
• Auto
• Force Full
• Force Half
Scroll through the list with the Up/Down arrows and select the appropriate parameter. Press
the Select key to select Ntwk Port Duplex.
Table 35: Ntwk Port Duplex configuration
Ntwk Port Duplex :
15. Disable Voice 802.1Q . Press the Select key to disable Voice 802.1Q.
A check mark in the Disable Voice 802.1Q box indicates that Voice 802.1Q is disabled.
Table 36: Voice 802.1Q configuration
Disable Voice 802.1Q: □
16. Configure Voice VLAN.
Use the right arrow in the Navigation key cluster to highlight the Voice VLAN box. Press the
Select key to access a list of Voice VLAN mode choices.
Scroll through the list with the Up/Down arrows and select the appropriate parameter. Press
the Select key to select the parameter.
Voice VLAN:
17. Enable or disable the VLAN Filter. Press the Select key to enable the VLAN Filter.
A check mark in the VLAN Filter box indicates that the VLAN Filter is enabled.
Table 37: VLAN Filter configuration
VLAN Filter : □
18. If 802.1Q is enabled, configure Ctrl Priority bits.
Use the right arrow in the Navigation key cluster to highlight the Ctrl Priority bits box. Press
the Select key to access a list of Ctrl Priority bits choices.
Scroll through the list with the Up/Down arrows and select the appropriate parameter. Press
the Select key to select the parameter.
March 2015
Auto
Auto
Force Full
Force Half
No VLAN
SIP Software for Avaya 1200 Series IP Deskphones-Administration
Comments? infodev@avaya.com
Configure the device settings
▼
▼
163