Configuration - Avaya 1230 Administration

Configuration

Depending on server policy, the Multiuser feature can require you to configure the
PROMPT_AUTHNAME_ENABLE value to YES in the device configuration file. This enables a prompt
that requires you to enter an Authentication ID that is different from the Login ID. For example, CS
1000 requires an Authentication ID to find a corresponding TN and a Login ID to find a key; enabling
PROMPT_AUTHNAME_ENABLE creates a prompt for the authentication ID.
When you configure Multiuser, consider the following parameters:
• MAX_LOGINS represents the number of user accounts that can log on at the same time.
Configure MAX_LOGINS to any value greater than one; the default is 24.
• Configure DOD_ENABLE to NO; a secondary user cannot log on if DOD_ENABLE is enabled. The
default value is NO.
• The SELECT_LAST_INCOMING parameter determines call selection when multiple calls are in
the Ringing state. If you configure SELECT_LAST_INCOMING to NO, the first selected call
remains the selected call as new calls are added to or drop from the list of ringing calls. If you
configure this value to YES, the selected call becomes the ringing call last added to the list. The
default value is NO.
Initial logon
To logon for the first time, you must enter a user name and password, and specify if the logon is
permanent or not. On the logon screen, you can choose which domain you want to access, and
change the language you want to use. You can use the Domain key only to select a domain from
the configured list; you cannot modify domains.
Figure 10: Primary logon screen
After you log on, the idle screen appears on the IP Deskphone. If there is no profile for the primary
account, the IP Deskphone automatically creates a profile. You can create up to five profiles. If you
exceed the limit of five profiles, the IP Deskphone automatically deletes the least recently-used
profile.
Similarly, configurations for each user of the primary account are loaded after a user logs on to the
IP Deskphone. The configurations are independent of the profile; if the account you use is registered
as the secondary account (not the primary account), the IP Deskphone uses the configurations of
March 2015 SIP Software for Avaya 1200 Series IP Deskphones-Administration
Comments? infodev@avaya.com
Configuration
175