Avaya 1230 Administration page 77

• DISABLE_PRIVACY_UI [YES | NO] — a flag to disable the privacy setting in UI menus.
Disabling the privacy setting in UI menus disables the user's ability to configure privacy
options.
- YES - disables the privacy setting in the UI menus.
- NO - enables the privacy setting in the UI menus. NO is the default.
• DISABLE_OCT_ENDDIAL [YES | NO] — a flag used to configure the pound (#) key. The
default setting is YES.
- YES - the pound (#) key initiates dialing when pressed after a phone number is entered.
- NO - the pound (#) key functions as any other digit or character on the dial pad typically
used in networks that use vertical service codes or access codes.
• FORCE_OCT_ENDDIAL [YES | NO] — a flag used to override attempts to change the function
of the pound (#) key on the Graphical User Interface (GUI). The default setting is NO.
- YES - overrides attempts to change the function of the pound (#) key on the GUI.
- NO - does not override a change of the function of the pound (#) key on the GUI.
• SNTP_ENABLE [YES | NO] — allows the IP Deskphone to obtain the time and date from an
NTP server. The default is NO.
The IP Deskphone updates the time once every 24 hours from the NTP server. If the
IP Deskphone cannot contact the server, the IP Deskphone tries every 15 minutes up to a
maximum of 6 attempts, and then hourly attempts are made. If SNTP_ENABLE is configured
as NO, the IP Deskphone tries to retrieve the time and date from the SIP proxy server.
However, not all SIP proxy servers support this method of retrieving the time and date.
- YES - enables NTP.
- NO - disables NTP.
• SNTP_SERVER [ip_address] — the IP address or FQDN of the NTP server that provides the
time and date to the IP Deskphone. If this is not specified, the IP Deskphone does not generate
any NTP requests.
- ip_address - the IP address of the NTP server in either Fully Qualified Domain Name
(FQDN) or non-FQDN format.
• MADN_TIMER [x] — used to configure the MADN polling timer interval (the interval at which
the IP Deskphone attempts to determine the MADN group of the logged-in user). The minimum
value for the polling interval is 900 seconds (15 minutes). The default value is 1800.
- x - the time delay (in seconds) between queries to find the MADN group DN of a user. The
minimum value 900.
• MADN_DIALOG [YES | NO] — used to configure the SIP URI or the GROUP DN for the
subscription to the dialog event. The default value is NO.
- YES- su bscribes to the dialog event using the SIP URI of the user.
- NO - subscribes to the dialog event using the group of the user.
• DEFAULT_CFWD_NOTIFY [YES | NO] — used to configure the "ring splash" which occurs
when either local call forwarding or network-based call forwarding have been enabled. If this
March 2015 SIP Software for Avaya 1200 Series IP Deskphones-Administration
Comments? infodev@avaya.com
Create the device configuration file
77