Common Feature Displays - Nortel M7410 Installation And Maintenance Manual

Common feature displays

You may see the following displays when you use a feature.
Access denied
Denied in admin
Feature timeout
Inactive feature
Invalid code
Not available
Set locked
1234567890123...
VIEW‚ OK
§
239>221
221
TRANSFER
221 calling
Call 221?
YES NO
Camped: 221
CALLBACK
P0908510 Issue 02
Someone is already using programming, or the feature you are trying
to use is not compatible with the configuration of the telephone or
line.
You have tried to use a feature, but you have not been given access
to it in administration programming.
You have taken more than 15 seconds to press a button in response
to a display.
You have entered a feature code that is used by an application
program that your system does not have.
You have entered an invalid feature code.
You have tried to use a feature that is not available in the present
setup of your Enterprise Edge system.
You cannot use the feature you have chosen because your
telephone is locked. See "Using Set lock" on page 100.
Press or press VIEW‚ or
£
to fit on the display. Press
This indicates a long distance call. (May be available with Call
Display services.)
You are receiving an internal call from telephone 239 forwarded by
telephone 221 or you have an Answer button for telephone 221 and
an internal call from 239 is ringing on 221.
You are connected to an internal call. Press
the call.
You are receiving a call from telephone 221.
You have received a Ring Again offer for a call to an internal
telephone. Press the flashing internal line button or
number again. On the M7100 telephone, just lift the receiver.
Otherwise, press or wait 30 seconds for the Ring Again offer to
NO
expire. For an explanation of Ring Again, see "Using Ring Again" on
page 36.
The person has not answered the camped call. The call has come
back to you. Press the line button or
call.
Enterprise Edge Feature Programming Telephone Guide
·VIEW to view a number that is too long
or when you are finished.
˙ OK
TRANSFER
YES
CALLBACK to reconnect to the
19
to transfer
to call the