General System Features; Pulse Or Tone Dialing; Disconnect Supervision; Hunt Groups - Nortel Enterprise Edge Feature Programming Telephone Manual

Nortel networks enterprise edge feature programming telephone guide
Table of Contents

Advertisement

General System features

The following features are available for the entire Enterprise Edge system.

Pulse or tone dialing

If your external lines use pulse dialing, you can switch temporarily to tone dialing
to communicate with devices such as answering machines, to access the features
that PBX systems may offer, or to use another Enterprise Edge system remotely.
Press
while on an active line. Once you hang up, your telephone returns to pulse
£
dialing.

Disconnect supervision

When Disconnect Supervision is assigned to a line, the Enterprise Edge system
monitors it to detect if an external caller hangs up. This allows the system to release
the line for other uses. Your installer assigns disconnect supervision.

Hunt Groups

Your Enterprise Edge system now allows you to establish Hunt Groups in your
system. Hunt Groups are a group of Enterprise Edge sets that can be called by a
single directory number. The Hunt Groups feature ensures calls are easily routed to
the appropriate people. For more information on Hunt Groups see Programming
Hunt Groups on page 101.

Internal numbers

Each telephone in the Enterprise Edge system has its own internal number. The
length of internal numbers in your system can be from two to seven digits on a non-
expanded system, and three to seven digits on an expanded system. All numbers in
your system are the same length. Your installer sets the length of internal numbers
(called the DN length). The default DN length is three.
To find out your internal number, use the Button Inquiry feature (
on an intercom button. On the M7100 telephone, Button Inquiry shows your
internal number followed by the function assigned to your single-memory button.

Line assignment

Any of the lines in your system can be assigned to any of your telephones. Your
installer assigns lines to telephones in Configuration programming. Lines can be
assigned to appear only, appear and ring, or to ring only.
P0908510 Issue 01
Enterprise Edge Feature Programming Telephone Guide
17
)
ƒ•‚

Advertisement

Table of Contents
loading

This manual is also suitable for:

Enterprise edge

Table of Contents