Figure 93. Ap Mode Configuration - Samsung WEC8500 Operation Manual

Wireless enterprise access point controllers (apc)

Hide thumbs Also See for WEC8500:

Table of Contents

WEC8050 / WEC8500 Operation Manual

3) To check the information of a configured AP, use the 'show ap detail [AP_NAME]'

Configuration using Web UI

In the menu bar of <WEC Main window>, select <Configuration> and then select the

<Access Points>  AP selection  <General> menu in the sub-menus.

After selecting the AP MODE NAME item, click the <Apply> button to apply the

configuration.

AP CLI Access Account

The APC operator can add or remove account information relating to the AP CLI. When the

APC is first installed, a default account is provided (id: root, password: samsung).

Up to three AP CLI accounts can be added, and at least one account must be configured.

Therefore, if there is only one remaining account, it cannot be deleted.

(* While each account may be in any of the three available levels (Administrator/Operator/

Monitor), there are currently no functional differences for the APs.)

Figure 92. AP mode configuration

page 197 of 673

Show Quick Links

Chapters

Table of Contents