Figure 82. 802.11B/G/N Window For Ap Group - Samsung WEC8500 Operation Manual

WEC8050 / WEC8500 Operation Manual
4.2.1.5 802.11b/g/n Configuration
Configuration using Web UI
In the menu bar of <WEC Main Window>, select <Configuration>, select <AP Groups>
in the submenu, and then select an AP group to configure. Settings can be configured under
the '802.11b/g/n' tab of the AP group.
The configuration items are as follows:
[Service Configuration of AP Group]

SERVICE: Enable or disable the radio service.
[OPERATIONAL TYPE]

Enable or disable of 11n service.
[OPTIONS]

Guard-interval(11n): select short/long for Guard-interval 20/40 Mhz.

Beamforming : Enable or disable of Beamforming.
[Channel Configuration]

CURRENT CHANNEL: Channel configuration (range: 1-14)

CHANNEL FIX: The configured channel is configured as fixed and it is not affected
by automatic adjustment functions such as RRM. When the <Monitor>  <Access
Points>  <Radio>  <802.11b/g/n> menu is selected, the channel value is shown
as * (optional).
[TX Power Setting]

TX CURRENT POWER: TX power (range: 3-30)

TX POWER FIX: The configured TX power is configured as fixed and it is not
affected by automatic adjustment functions such as RRM. When the <Monitor> 
<Access Points>  <Radio>  <802.11b/g/n> menu is selected, the TxPower value
is shown as * (optional).
© Samsung Electronics America
Figure 81. 802.11b/g/n Window for AP Group
Version 7.1
page 170 of 673