WEC8050 / WEC8500 Operation Manual
4) Use the 'send-remote-acl-to-ap profile-only' command to send the ACL Profile
information of the remote AP group to APs.
5) Use the 'send-remote-acl-to-ap all' command to send the information on the ACL
Profile, Tunneling Forwarding and Local Bridging Forwarding of the remote AP group
to APs.
Configuration using Web UI
In the menu bar of <WEC Main window>, select <Configuration> and then select the
<AP Groups> menu in the sub-menus. After selecting the name of the remote AP group,
you can configure Local Bridging in the "ACL Profile" item of the 'Remote AP Group' tab.
In addition, you can click the "Send To APs" button to send the information on ACL
Profile, Tunnel Forwarding, and Local Bridging Forwarding to APs.
Figure 87. Window for Configuring Local Bridging Forwarding of Remote AP Group
© Samsung Electronics America
Version 7.1
page 186 of 673