Samsung WEC8500 Operation Manual page 243

WEC8050 / WEC8500 Operation Manual
Item
ACCOUNTI
NG
SERVER
FALLBACK TEST
INTERVAL
ACCOUNTING INTERVAL
Select AUTHENTICATION SERVER and ACCOUNTING SERVER as Enable and
configure the rest items.
Internal RADIUS Server
Operator can use a RADIUS server in the APC. The internal RADIUS server only
supports the authentication function and does not support the accounting or aaa-
override, etc. To use an internal RADIUS server, select 'Internal' when selecting a
RADIUS server during authentication server configuration.
2) Click the <L2> tab.
Select the L2 Security Type as WPA + WPA2 and AUTH KEY MGMT as 802.1x.
After configuring the rest values as required, click the <Apply> button.
For more information about detail configuration item of L2 tab, see '5.3.1
Initialization of WLAN Security Function'.
© Samsung Electronics America
Enable/ Whether the accounting function is enabled.
Disable - Enable: The accounting function is enabled.
- Disable: The accounting function is disabled.
RADIUS Accounting server that will be used as the first priority
SERVER 1 (Can select one out of pre-configured RADIUS servers.)
RADIUS Accounting server that will be used as the second priority
SERVER 2 (Can select one out of pre-configured RADIUS servers.)
RADIUS Accounting server that will be used as the third priority
SERVER 3 (Can select one out of pre-configured RADIUS servers.)
RADIUS server Fallback attempt interval (unit: s, range: 0-500,
default: 0), When set to 0, the fallback function is disabled.
Accounting information transmission interval (unit: s, range: 0-
10000, default: 600), When set to 0, the periodic accounting
information transmission function is disabled.
Figure 124. WPA/WPA2 802.1x Configuration (2)
Description
Version 7.1
page 243 of 673