Ap Management Ip In Apc Setting Error - Samsung WEC8500 Maintenance Manual

WEC8500/8050 Maintenance Manual
3.1.2

AP management IP in APC setting error

Symptoms
CAPWAP Status of the AP is not changed to 1/2/0 and cannot be connected to the APC.
WEC8500# show ap summary
AP Mgnt interface IP : 10.10.10.11 (vlan1.110)
AP_ID Profile AP_NAME
====== ====== =============== ================ ======== ===== ========
2 ap_2
Possible Causes
The APC AP Mgnt interface IP setting is incorrect.
Checking and Solving the Problem
1) Check if the AP can ping other interfaces of the APC but not the AP Mgnt interface IP.
2) Retrieve the interface state of APC AP Mgnt interface IP and check that it is 'up'.
[Checking AP Mgnt Interface IP Info from APC]
Check if the AP Mgnt interface IP information is a valid interface and the status of interface
is up.
WEC8500/configure# show apc summary  Check the APC AP Mgnt interface
IP
===== APC Summary =====
AP Mgnt interface IP : 100.100.100.1 (vlan1.100)
MaxApNo
ActiveApNo
TotalApNo
802.11a/n Radios
802.11b/g/n Radios
ActiveStationNo
SecurityAuthType
RMacField
DtlsPolicy
Samsung Electronics America
MAC_Address
AP_0000aa161616 00:00:aa:16:16:16 0.0.0.0 1/2/0
: 500
: 10
: 117
: 10/107
: 10/107
: 1
: X.509
: Support
: Clear-text
Version 5.1
IPv4Addr State Location
page 59 of 87