WEC8050 / WEC8500 Operation Manual
3.5.1.3
WLAN ACL Configuration
1) Go to the fqm mode to configure the configure ACL rule of CLI.
APC# configure terminal
APC/configure# fqm-mode
2) Configure WLAN ACL by entering the 'ip access-group wireless' command.
ip access-group wireless [ACL_NAME]
Parameter
ACL_NAME
3) To check the configuration information, use the 'show running-config network'
command.
3.5.1.4
Admin ACL Configuring
Configuration using CLI
1) Go to the fqm mode to configure the configure ACL rule of CLI.
APC# configure terminal
APC/configure# fqm-mode
2) Configure Admin ACL by entering the 'ip access-group wireless' command.
ip access-group system [ACL_NAME]
Parameter
ACL_NAME
3) To check the configuration information, use the 'show running-config network'
command.
Configuration using Web UI
In the menu bar of <WEC Main window>, select <Configuration> and then select the
<Security> <Access Control Lists> <Access Group (System)> menu in the sub-
menus.
The initial window of Access Group is shown below. After selecting a configuration, click
the <Apply> button to configure Admin ACL.
© Samsung Electronics America
Description
ACL name to configure
Description
ACL name to configure
Version 7.1
page 118 of 673