Samsung WEC8500 Operation Manual page 66

WEC8050 / WEC8500 Operation Manual
[show bridge]
This command retrieves bridge information.

show bridge
[show interface switchport bridge]
This command retrieves the bridge information, i.e. the layer 2 protocol characteristic
information of the current VLAN, of a switch port.

show interface switchport bridge [BRIDGE_NAME]
Parameter
BRIDGE_NAME
[switchport]
This command configures a switch port, i.e. the layer 2 protocol characteristic information
of the current VLAN. The 'no' parameter is used for default configuration. Go to interface
mode and then execute the command.

switchport

no switchport
© Samsung Electronics America
Description
Bridge name
Version 7.1
page 66 of 673