WEC8050 / WEC8500 Operation Manual
Parameter
NUMBER
7) To lead the station which performs load balancing to connect to a specific AP, set the
probe response limit time to other APs.
no-probe-timeout [NUMBER]
Parameter
NUMBER
8) The rssi-high value is a criterion for excluding candidates for load balancing to be
selected. The station with the RSSI value higher than the set value does not attempt at
load balancing (In case of the active mode, N/A).
rssi-high [NUMBER]
Parameter
NUMBER
9) The rssi-high value is a criterion for excluding candidates for load balancing to be
selected. The station with the RSSI value higher than the set value does not attempt at
load balancing (In case of the active mode, N/A).
rssi-low [NUMBER]
Parameter
NUMBER
© Samsung Electronics America
Description
Reconnection limit time (0~100 sec.)
Description
Probe response limit time (0~100 sec.)
Description
Probe response limit time (0~100 sec.)
Description
RSSI reference value (-100~0 dbm)
Version 7.1
page 366 of 673