Samsung WEC8500 Operation Manual page 298

WEC8050 / WEC8500 Operation Manual
2) Enable the SIP ALG.
APC/configure# sipalg enable
3) To check the configuration information, use the 'show sipalg configuration' command.
Configuration using Web UI
In the menu bar of <WEC Main window>, select <Configuration> and then select the
<Controller>  <General> menu in the sub-menus.
After configuring SIP ALG that is a voice CAC related configuration in the SIP ALG, click
the <Apply> button.
© Samsung Electronics America
Figure 158. SIP ALG configuration window
Version 7.1
page 298 of 673