Figure 87. Window For Configuring Tunneling Forwarding Of Remote Ap Group - Samsung WEC8500 Operation Manual

WEC8050 / WEC8500 Operation Manual
Figure 86. Window for Configuring Tunneling Forwarding of Remote AP Group
4.2.2.5 Configuring Local Bridging Forwarding of Remote AP Group
You can configure the VLAN ID, ACL, and PreAuth ACL to a WLAN set with local
bridging among WLANs included in the remote AP group.
Configuration using CLI
To configure the local bridging forwarding of the remote AP group, perform the command
as follows:
1) Go to configure  Remote AP Group configuration mode of CLI.
WEC8500# configure terminal
WEC8500/configure#
WEC8500/configure/ap-group [remote-ap-group-name]
WEC8500/configure/ap-group/[remote-ap-group-name]#remote
2) Configure the information on Local Bridging to the WLAN set with the tunneling
mode.

local-bridging [WLAN-ID] { vlan-id [VLAN-ID] | acl-name [ACL-NAME] | pre-
auth-name [PRE-AUTH-NAME] }
3) Execute the 'show ap-group remote-forwarding [REMOTE AP GROUP NAME]'
command to check the AP group information.
© Samsung Electronics America
Version 7.1
page 185 of 673