Figure 263. Configuration Synchronization Role Configuration; Figure 264. Add Sync. Members Window - Samsung WEC8500 Operation Manual

WEC8050 / WEC8500 Operation Manual
Configuration using Web UI
[Adding APC to APC List]
Add APCs to synchronize to the APC list by referring to 'APC List Management'.
[Synchronization Configuration]
In the menu bar of <WEC Main window>, select <Configuration> and then select the
<Configuration Synchronization> → <General> menu in the sub-menus.
Shown at the very top of Sync. Members is the current APC. Click the APC NAME of the
current APC to open the role configuration screen.
[Adding/deleting members to/from Sync. Members]
Click the <Add>/<Delete> buttons to add/delete members to/from Sync. Members. The
Add Sync. Member window is shown below.
[Retrieving Mismatching Configuration Information]
Configurations can be compared between synchronization members and mismatching
configuration information can be viewed. To check mismatching configuration information,
the APCs must be configured as synchronization members.
In the menu bar of <WEC Main window>, select <Configuration> and then select the
<Configuration Synchronization>  <Audit> menu in the sub-menus.
1) Immediate retrieval of mismatching configuration information
© Samsung Electronics America
Figure 262. Configuration Synchronization Role Configuration
Figure 263. Add Sync. Members Window
Version 7.1
page 497 of 673