Samsung WEC8500 Operation Manual page 222

WEC8050 / WEC8500 Operation Manual

AAA OVERRIDE: If the WLAN is enabled with the device authentication function
using a AAA server, the AAA-override function can be enabled so that the user-
specific settings configured in the AAA server are applied with priority over the APC
settings.

MAXIMUM ALLOWED STATIONS: Limits the number of users per WLAN.

ADMIN STATUS: Enables or disables the function.
5.1.2 WLAN Additional Configuration
Each wireless terminal can receive a differentiated service according to the WLAN
configuration. The procedure of configuring the WLAN additional function is as follows.
Configuration using CLI
1) Go to configure  wlan configuration mode of CLI.
WEC8500# configure terminal
WEC8500/configure# wlan 1
WEC8500/configure/wlan 1
2) If the WLAN is enabled with the device authentication function using a AAA server,
the AAA-override function can be enabled so that the user-specific settings configured
in the AAA server are applied with priority over the APC settings.
WEC8500/configure/wlan 1# aaa-override
3) Determine whether to configure the Guest service.

guest-flag
4) Configure a VLAN ID to use locally.

local-vlan [VLAN_ID]
Parameter
VLAN_ID
5) Specify the service MAC type.

mac-type [MAC_TYPE]
Parameter
MAC_TYPE
© Samsung Electronics America
- localMac: An AP itself provides data service.
- splitMac: Provides data service through the APC.
Description
VLAN ID (range: 1-4094)
Description
Version 7.1
page 222 of 673