Samsung WEC8500 Operation Manual page 334

WEC8050 / WEC8500 Operation Manual
[Deleting APC from cluster]
Delete the APC added in cluster. To delete an APC from a cluster, you must delete the APC
from the cluster configuration of all the APCs in the cluster.
1) Go to the configure mode of the CLI.
WEC8500# configure terminal
WEC8500/configure#
2) Delete an APC from the cluster. To delete all the APC systems in a cluster, enter the
'cluster del-apc-all' command.

cluster del-apc [INDEX]

cluster del-apc-all
Parameter
INDEX
[Retrieving APC information added in cluster]
You can check the added APC information using the 'show cluster list-apc' command.
WEC8500# show cluster list-apc
======================================================================
INDEX APC-NAME
======================================================================
1 APC-1
2 APC-2
======================================================================
© Samsung Electronics America
IPv4-ADDRESS DB-REF-INT CONNECT-STATUS
192.168.87.146 120
192.168.87.217 120
Description
Index in cluster (range: 1-12)
CONNECTED[1]
CONNECTED[1]
Version 7.1
page 334 of 673