SSC-1000 (gb) 2009.1.8 1:38 PM Page 1 CAUTION RISK OF ELECTRIC SHOCK DO NOT OPEN CAUTION : TO REDUCE THE RISK OF ELECTRIC SHOCK, DO NOT REMOVE COVER (OR BACK). NO USER SERVICEABLE PARTS INSIDE. REFER SERVICING TO QUALIFIED SERVICE PERSONNEL.
SSC-1000 (gb) 2009.1.8 1:38 PM Page 2 User’s Guide IMPORTANT SAFEGUARDS 8. Accessories : Do not place this video product on an unstable cart, stand, tripod, bracket, or table. The video product may fall, causing serious injury to a child or adult, and serious damage to the 1.
SSC-1000 (gb) 2009.1.8 1:38 PM Page 4 User’s Guide 10. Power sources : This video product should be operated 16. Damage requiring service : Unplug this video only from the type of power source indicated on the product from the wall outlet and refer servicing to marking label.
It is possible to connect and use up to a maximum of 128 units of 5. Confirmation Matter in TImes of Abnormality Occurrence ..22 Samsung Dome Cameras, a maximum of 128 units of Multiplex or a maximum of 32 receiver units.
6) CLOSE/OPEN, NEAR/FAR, and TELE/WIDE This is used when controlling the actions of the IRIS, FOCUS, and ZOOM of the zoom lens connected to the Samsung Dome Camera or the Receiver Unit. 7) MENU This is used when entering or coming out of the set-up mode for SAMSUNG various types of set-ups.
This is used when repeatedly moving the two spots of the Pan/Tilt This is used when stopping the Switching mode of the SEQUENCE, connected to the Samsung Dome Camera or the receiver unit. TOUR, and SALVO of the Matrix Switcher.
CONTROLLER of the set-up mode. 1) Connect the RS-485 Cable. Connect the Samsung Dome Camera, Multiplex or the RS-485 cable of $ CONTROLLER SET the receiver unit to the out terminal, and connect the RS-485 cable of a If you select the controller set in the main...
In order to set up the preset of the PANASONIC, KALATEL, DIAMOND, AD, PRESET NO [ 0 0 0 ] receiver unit (or Samsung Dome Camera), POS I T I ON SET PHILIPS, ERNA, VCL TP, TECHWIN, move CURSOR( ) to PRESET SET in the...
SSC-1000 (gb) 2009.1.8 1:38 PM Page 18 User’s Guide 3) Manipulating the RECEIVER UNIT 4) Manipulating the MATRIX SWITCHER ! MANUAL SELECT action For receiver unit manipulation, as only those applying to the cam no. indicated in the LCD are possible, first select the camera you wan to This is a function for putting out camera visuals of your discretion in manipulate.
SSC-1000 (gb) 2009.1.8 1:38 PM Page 20 User’s Guide # TOUR action 5) Manipulating the MULTIPLEX This is a function for putting out the Tour Switching program set up in the matrix switcher on the monitor of your discretion. ! Into the multiplex control mode First, select the monitor you intend to put out, and when you press You get into the multiplex control mode by pressing “MUX CONTROL”...
1. Check the polarity of the RS-485 indication Baud Rate 1200, 2400, 4800, 9600, 19200, 38400 BPS part is not possible. line. SAMSUNG, PELCO-D, PELCO-P, VICON 2. Check if the address of the camera part has PROTOCOL PANASONIC, KALATEL, DIAMOND, been set up well.