WEC8050 / WEC8500 Operation Manual
Configuration using Web UI
In the menu bar of <WEC Main window>, select <Configuration> and then select the
<WLANs> menu in the sub-menus. Select a WLAN ID to change in the WLANs screen
and go to the <General> tab. In the screen, you can use various functions such as adding or
deleting a WLAN.
You can configure various functions such as interface group and SSID, etc.
The configurations available in the General tab are as follows:
INTERFACE GROUP: Configures an interface group.
RADIO AREA: Configures a radio area.
CAPWAP TUNNEL MODE/LOCAL VLAN: Configures the local switching function.
SUPRESS SSID: Enables or disables the function.
© Samsung Electronics America
Figure 111. WLAN basic configuration (1)
Figure 112. WLAN basic configuration (2)
Version 7.1
page 221 of 673