Display Mld Group Port-Info - HP 3600 v2 Series Command Reference Manual

Examples
# Display detailed information about dynamically joined MLD groups on all interfaces.
<Sysname> display mld group verbose
Interface group report information
Vlan-interface1(FE80::101)
Total 1 MLD Groups reported
Group: FF03::101
Uptime: 00:01:46
Expires: 00:01:30
Last reporter: FE80::10
Last-listener-query-counter: 0
Last-listener-query-timer-expiry: off
Group mode: include
Version1-host-present-timer-expiry: off
Table 68 Command output
Field
Interface group report information
Total 1 MLD Groups reported
Group
Uptime
Expires
Last reporter
Last-listener-query-counter
Last-listener-query-timer-expiry
Group mode
Version1-host-present-timer-expiry

display mld group port-info

Syntax
display mld group port-info [ vlan vlan-id ] [ slot slot-number ] [ verbose ] [ | { begin | exclude | include }
regular-expression ]
View
Any view
Description
MLD group information on the interface.
One MLD group was reported.
IPv6 multicast group address.
Length of time since the IPV6 multicast group was joined.
Remaining time of the IPv6 multicast group, where "off" means that
the multicast group never times out.
IPv6 address of the host that last reported membership for this
group.
Number of MLD last listener queries sent.
Remaining time of the MLD last listener query timer, where "off"
means that the timer never times out.
Multicast source filtering mode:
•
Include.
•
Exclude.
This field is displayed only when the device is running MLDv2.
Remaining time of the MLDv1 host present timer, where "off" means
that the timer never times out.
This field is displayed only when the device is running MLDv2.
313