HP 3600 v2 Series Command Reference Manual page 446

Parameters
ipv6-address: Specifies a destination IPv6 address.
prefix-length: Specifies a prefix length, in the range of 0 to 128.
longer-match: Displays the routes that match the specified prefix.
verbose: Displays both detailed active and inactive routing information permitted by the ACL. Without
this keyword, only the brief information about active routes permitted by the ACL is displayed.
|: Filters command output by specifying a regular expression. For more information about regular
expressions, see Fundamentals Configuration Guide.
begin: Displays the first line that matches the specified regular expression and all lines that follow.
exclude: Displays all lines that do not match the specified regular expression.
include: Displays all lines that match the specified regular expression.
regular-expression: Specifies a regular expression, a case-sensitive string of 1 to 256 characters.
Description
Use display ipv6 multicast routing-table ipv6-address to display the multicast routing information for the
specified destination IPv6 address.
Examples
# Display brief information about the specified multicast route.
<Sysname> display ipv6 multicast routing-table 100::1 128
Routing Table:
Summary Count 1
Destination: 100::1/128
NextHop
Interface
# Display the brief route information that falls into the specified network.
<Sysname> display ipv6 multicast
Routing Tables:
Summary Count 2
Destination: 4::
NextHop
Interface
Destination: 4:4::
NextHop
Interface
# Display the detailed route information that falls into the specified network.
<Sysname> display ipv6 multicast
Routing Tables:
Summary count:1
Destination: 4:4::
NextHop
Interface
: ::1
: InLoop0
: ::1
: Vlan-interface1
: 3::1
: Vlan-interface1
: 3::1
: Vlan-interface1
Protocol
Preference: 0
Cost
routing-table 4:: 16 longer-match
Protocol
Preference: 0
Protocol
Preference: 60
routing-table 4:4:: 32 verbose
Protocol
Preference: 60
433
: Direct
: 0
: Static
Cost : 0
: Static
Cost : 0
: Static
Cost : 0