Network (Ipv6 Mbgp Address Family View); Peer Advertise-Community (Ipv6 Mbgp Address Family View) - HP 3600 v2 Series Command Reference Manual

Ip multicast
Hide thumbs Also See for 3600 v2 Series:
Table of Contents

Advertisement

[Sysname-bgp-af-ipv6-mul]

network (IPv6 MBGP address family view)

Syntax
network ipv6-address prefix-length [ route-policy route-policy-name | short-cut ]
undo network ipv6-address prefix-length [ short-cut ]
View
IPv6 MBGP address family view
Default level
2: System level
Parameters
ipv6-address: IPv6 address prefix.
prefix-length: Prefix length of the IPv6 address, in the range of 0 to 128.
short-cut: If the keyword is specified for an IPv6 multicast eBGP route, the route will use the local
preference rather than its own preference, and therefore it probably does not become the optimal route.
route-policy-name: Name of a routing policy, a case-sensitive string of 1 to 63 characters.
Description
Use network to inject a network to the IPv6 MBGP routing table.
Use undo network to remove a network from the routing table.
By default, no network is injected.
The network to be injected must exist in the local IPv6 routing table. You can use a routing policy to
control the advertisement of the route with more flexibility.
The route injected through the network command has the IGP origin attribute.
Examples
# Inject the network 2002::/16.
<Sysname> system-view
[Sysname]bgp 100
[Sysname-bgp]ipv6-family multicast
[Sysname-bgp-af-ipv6-mul] network 2002:: 16

peer advertise-community (IPv6 MBGP address family view)

Syntax
peer { ipv6-group-name | ipv6-address } advertise-community
undo peer { ipv6-group-name | ipv6-address } advertise-community
View
IPv6 MBGP address family view
437

Advertisement

Table of Contents
loading

Table of Contents