HP 3600 v2 Series Command Reference Manual page 327

Default level
1: Monitor level
Parameters
vlan-id: Specifies a VLAN by its ID, in the range of 1 to 4094. If you do not specify any VLAN, this
command displays the Layer 2 port information of MLD groups in all VLANs.
slot slot-number: Displays the Layer 2 port information of MLD multicast groups on the specified IRF
member switch. The slot-number argument specifies the ID of an IRF member switch. The value range for
the argument depends on the number of member switches and their member IDs in the IRF fabric. If no
IRF fabric exists, the slot-number argument is the current device number.
verbose: Displays the detailed information about Layer 2 ports of MLD groups.
|: Filters command output by specifying a regular expression. For more information about regular
expressions, see Fundamentals Configuration Guide.
begin: Displays the first line that matches the specified regular expression and all lines that follow.
exclude: Displays all lines that do not match the specified regular expression.
include: Displays all lines that match the specified regular expression.
regular-expression: Specifies a regular expression, a case-sensitive string of 1 to 256 characters.
Description
Use display mld group port-info to display Layer 2 port information of MLD groups, including Layer 2
information of dynamic and static MLD group entries.
Examples
# Display detailed Layer 2 port information of MLD groups.
<Sysname> display mld group port-info verbose
Total 1 IP Group(s).
Total 1 IP Source(s).
Total 1 MAC Group(s).
Port flags: D-Dynamic port, S-Static port, C-Copy port
Subvlan flags: R-Real VLAN, C-Copy VLAN
Vlan(id):2.
Total 1 IP Group(s).
Total 1 IP Source(s).
Total 1 MAC Group(s).
Router port unit board: Mask(0x0000)
Router port(s):total 1 port(s).
IP group(s):the following ip group(s) match to one mac group.
IP group address: FF03::101
(FE80::1, FF03::101):
MAC group(s):
MAC group address:3333-0000-0101
Eth1/0/1
Attribute: Host Port
Host port unit board: Mask(0x0000)
Host port(s):total 1 port(s).
Eth1/0/2
Host port unit board: Mask(0x0000)
(D) ( 00:01:30 )
(D) ( 00:03:23 )
314