Display Mld Ssm-Mapping Group - HP 3600 v2 Series Command Reference Manual

Ip multicast
Hide thumbs Also See for 3600 v2 Series:
Table of Contents

Advertisement

display mld ssm-mapping group

Syntax
display mld ssm-mapping group [ ipv6-group-address | interface interface-type interface-number ]
[ verbose ] [ | { begin | exclude | include } regular-expression ]
View
Any view
Default level
1: Monitor level
Parameters
ipv6-group-address: Specifies a multicast group by its IPv6 address, in the range of FFxy::/16 (excluding
FFx0::/16, FFx1::/16, FFx2::/16, and FF0y::), where x and y represent any hexadecimal number
ranging from 0 to F. If you do not specify any IPv6 multicast group, this command displays the
information of all IPv6 multicast groups created based on the configured MLD SSM mappings.
interface-type interface-number: Specifies an interface by its type and number. If you do not specify any
interface, this command displays the multicast group information created based on the configured MLD
SSM mappings on all interfaces.
verbose: Displays detailed information about multicast groups created based on the configured MLD
SSM mappings.
|: Filters command output by specifying a regular expression. For more information about regular
expressions, see Fundamentals Configuration Guide.
begin: Displays the first line that matches the specified regular expression and all lines that follow.
exclude: Displays all lines that do not match the specified regular expression.
include: Displays all lines that match the specified regular expression.
regular-expression: Specifies a regular expression, a case-sensitive string of 1 to 256 characters.
Description
Use display mld ssm-mapping group to display information about the multicast groups created based on
the configured MLD SSM mappings.
Examples
# Display detailed information about IPv6 multicast group FF3E::101 created based on the configured
MLD SSM mappings on all interfaces.
<Sysname> display mld ssm-mapping group ff3e::101 verbose
Interface group report information
Vlan-interface1(FE80::101):
Total 1 MLD SSM-mapping Group reported
Group: FF3E::101
Uptime: 00:01:46
Expires: off
Last reporter: FE80::10
Group mode: include
Source list(Total 1 source):
Source: 30::1
324

Advertisement

Table of Contents
loading

Table of Contents