HP 3600 v2 Series Command Reference Manual page 225

View
Any view
Default level
2: Monitor level
Parameters
group-name: Specifies an IPv4 MBGP peer group by its name, a string of 1 to 47 characters.
|: Filters command output by specifying a regular expression. For more information about regular
expressions, see Fundamentals Configuration Guide.
begin: Displays the first line that matches the specified regular expression and all lines that follow.
exclude: Displays all lines that do not match the specified regular expression.
include: Displays all lines that match the specified regular expression.
regular-expression: Specifies a regular expression, a case-sensitive string of 1 to 256 characters.
Description
Use display bgp multicast group to display IPv4 MBGP peer group information.
Examples
# Display the information of the IPv4 MBGP peer group aaa.
<Sysname> display bgp multicast group aaa
BGP peer-group is aaa
Remote AS 200
Type : external
Maximum allowed prefix number: 4294967295
Threshold: 75%
Configured hold timer value: 180
Keepalive timer value: 60
Minimum time between advertisement runs is 30 seconds
Peer Preferred Value: 0
No routing policy is configured
Members:
Peer
2.2.2.1
Table 45 Command output
Field
BGP peer-group
Remote AS
Type
Maximum allowed prefix number
AS MsgRcvd MsgSent
200 0
OutQ PrefRcv Up/Down
0 0 0 00:00:35 Active
Description
Name of the peer group.
AS number of the peer group.
Type of the peer group: iBGP or eBGP.
Maximum allowed prefix number.
212
State